Dräger respiratory mask X-plore® 1930 FFP3, different pack sizes

Characteristics of the breathing mask

The CoolSAFE™ filter material provides effective protection against fine dust as well as solid and liquid particles. The high filter performance goes hand in hand with a low breathing resistance and enables the wearer of the mask to work easily and without fatigue, even over a longer period. The mask is also equipped with the VarioFLEX™ head harness, which is very elastic and continuous. This ensures that the mask is put on quickly and safely.
Thanks to the dimensionally stable design and the three-part fold design, the respiratory mask sits extra tightly, but is comfortable to wear, offers a pleasant feeling of space inside and leaves no feeling of pressure / pressure points.

When developing the mask, great importance was attached to the fact that it can also be combined with eye protection. Furthermore, the air flow is deliberately deflected downwards during exhalation and thus reduces the temperature felt under the mask, furthermore this ensures that the glasses of a pair of glasses do not fog up.

Further advantages of the X-plore® 1930:

• Visible marking for pressing on the nose clip
• The nose piece is padded with foam on the inside
• Compact folding design & hygienically individually packaged, this ensures space-saving and safe transport
• extra low breathing resistance
  Size: M / L
• Made in Sweden
• Shelf life: 4 years from the date of manufacture

Instructions for putting on the mask

1. Hold the flat folded mask in one hand and pull out the lower loop of the strap far enough so that the upper loop is firmly against the mask.
2. Fold the mask open with your other hand and slightly bend the nose clip inwards.
3. Place the mask under your chin and over your nose. Pull the lower loop over your head and back of your neck.
4. Place the top loop in the top third of the back of your head. For hairstyles with a braid, over this.
5. Adjust the length of the loops by pulling them so that the mask fits comfortably and the tension is evenly distributed.
6. Press on the nose clip.

Checking the density:
Grasp the mask with both hands and exhale vigorously.

• If air escapes in the nose area, adjust the nose clip again.
• If air escapes at the edges, adjust the mask and check the position of the bands.