perform® Surface disinfection, powder, from Schülke, 900g

perform® is suitable for the disinfection of surfaces and medical devices. As a very well-established product with a broad spectrum of activity and high material compatibility, it is used in all hospital areas. perform® is also suitable for the disinfection of respirators and inhalation masks as well as training manikins.

Properties of the perform® disinfection concentrate from Schülke

• Powdered concentrate
• based on active oxygen
• very good material compatibility
• broad spectrum of activity (limited virucidal PLUS, tuberculocidal, sporicidal (incl. C. difficile))
• size: 900g

Instructions for use of the perform® disinfectant concentrate from Schülke

To prepare the use solution, fill bucket with water, add product and dissolve. When using the can, dose appropriately according to the dosing table or can label:

• 1 sachet (40 g) to 8 l of water = 0.5 % solution.
• 2 sachets (80 g) to 8 l water = 1 % solution

Prepared working solutions have a standing time of max. 30 hours (at 20°C) and 4 hours (at 40°C) of guaranteed active substance stability. Renew the working solution in case of clearly visible contamination. Apply the use solution in the desired concentration to floors using the 2-step wiping method. Damp wipe medical devices and other surfaces. To avoid residue formation, only a minimal residual moisture should remain on the surface after the 2nd wipe. In case of immersion disinfection, rinse the products with water after the exposure time. Due to its good material compatibility, perform® can also be used on sensitive surfaces such as PMMA. Make sure that all visible soiling is removed before disinfection. Clean equipment well with water. Intended for use by professionals only. Serious incidents related to the product must be reported to the manufacturer and the competent authority.

Composition:

• 100 g powder contains the following active ingredients:
• 45 g pentakalium bis(peroxymonosulfate) bis(sulfate).
• Labeling according to VO (EC) No. 648/2004: 5 - 15 % anionic surfactants, < 5 % non-ionic surfactants, < 5 % phosphonates, < 5 % soap, fragrances.

Hints: Use disinfectant with care. Always read label and product information before use.